Amada Laser Pulsar 2415, 3 kw ,


Amada Laser Pulsar 2415, 3 kw ,

Stock Number: 2503

Amada pulsar 2415

Age: 2001


Amada Laser Pulsar 2415, 3 kw ,, Click to view larger photo...       Amada Laser Pulsar 2415, 3 kw ,, Click to view larger photo...       Amada Laser Pulsar 2415, 3 kw ,, Click to view larger photo...       Amada Laser Pulsar 2415, 3 kw ,, Click to view larger photo...      
Click to view larger photo


SpecificationDescription
Sheet Width61"
Sheet Length198"
Wattage3000 watts
IPM3149
X axis travel99"
Y Axis Travel61"
Z Axis Travel11.8"
Control TypeFanuc 160iL
Machine Dimensions99 x 225 x 90
Machine Weight20000

Equipped With:
3000 WATT AMADA PULSAR LC2415XLA3 CNC LASER SYSTEM
MFG: 2001 - APPROXIMATELY 37,500 TOTAL HOURS w/ APPROX. 1,000 ON TURBO BLOWER

Motion Package
Travel Method: X axis for work piece movement, Y axis for cutting head movement
Control Method: X, Y& Z simultaneous 3 axis control and B axis
Drive Motors: FANUC AC Servo (X, Y, Z and B)
Maximum Sheet Size: 61" (Y) x 198" (X) with one repositioning cycle
Maximum Axis Travel: 61" (Y) x 99" (X) x 11.8" (Z) x 0.78" (B)
Maximum Cutting Speed: 2362 IPM
Maximum Table Speed: 3,149 IPM per axis (4,454"/min. 45 vector)
Maximum Speed - Z-Axis: 2362 IPM
Positioning Accuracy: 1: 0.0004" Repeat
Repeatability: 0.0002"
Maximum Material Weight: 727 lbs. (5' x 10' x 3/8" or 4' x 8' x 1/2")
Number of Clamps: 3
Work Chute: 66" (Y) x 21" (X)
Assist Gas: 4 ports, part program selectable
Machine Size (WxDxH): 99" x 225" x 90"
Machine Weight: Approx. 20,000 lbs. including laser resonator
Electrical Requirements: 208 VAC, 3 phase, 60 Hz., 10 KVA
(1) Processing accuracy will be different

CNC Controller
Model: FANUC 160i-L - 32 bit
Display: LCD Color Graphics Display
Control Function: X, Y,Z, and B Simultaneous 3 Axis and B axis Laser
Power Control
Input Method: MDI, Edit, DNC or 3" PC Compatible Floppy Disk
Minimum Command Unit: 0.0001" (X, Y, Z)
Minimum Travel Unit: 0.0001" (X, Y, Z)
Standard Memory: 128K (320m)
Optional Memory: Expandable to 256K or 512K
Operating Modes: Automatic, MDI& Manual
Display Modes: Program Contents, Position Information, Program Check, Settings, Parameters, Beam Diameter Compensation, Assist Gas Status, Self
Diagnostics: Interlock Displays Water Temperature, Gas Pressure, Vacuum Leak, Blower, Malfunction, Shutter Power, Discharge, Assist Gas, Door Open, Electrical Requirements: Included in Machine Requirements
Fanuc AF4000 Maximum material thicknesses: (clamping thickness limit 1/2")
Carbon Steel : 0.5"
Stainless Steel: 0.375 Clean Cut
Aluminum: 0.25"


HomeIndexContactView Cart


Amada Laser Pulsar 2415, 3 kw ,
MACLEAN MACHINERY NETWORK
6050 Peachtree Pkwy, Suite 240
Norcross, GA 30092
Phone 770-934-6500

doug@macleanmachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com